Floppy Disk Save and Load
56 PSR-450 Owner’s Manual
●To overwrite an existing file on the disk use the [+] and [–] buttons to select
the name of the file you want to overwrite.
3Change the file name if necessary.
The file name shown in the display can be changed via the keyboard. File
names can have a maximum of 8 characters.
•When a key is pressed the character above that key will be inserted at
the current cursor location.
• Press the A#5 key to move the cursor to the left, or the B5 key to move
the cursor to the right.
• Press the C6 key to erase the character at the cursor and leave a space.
4Press the [EXECUTE] button.
5Execute the save operation.
Press the [+/YES] button to begin execution of the save operation. “Saving”
will appear on the display while the file is being saved.
You can abort the save operation by pressing the [–/NO] button.
Exit from the save mode by pressing the [UTILITY] button.
“Complete” will appear on the display when the save operation has been
completed.
FILENAME
S-U
•If you change the file name the file
will be saved as a new file.
NOTE
A#5B5
C6
Input characters
•If you have selected a file to which
data has already been saved,
“yES Over Wr?” will appear on the
top line of the display.
NOTE
FILENAME
YES
• While the file is being saved
(“Saving” message appears on
the display), never eject the
floppy disk or turn the power
off.
CAUTION
Saving
S-U
• If there isn’t enough space on the
disk, a “DiskFull” message
appears, and you will not be able
to save any data. You can delete
unneeded files on the disk (page
58), or replace the disk with a new
one and repeat the save opera-
tion.
• If a write error occurs during a
save operation, an “Error” mes-
sage appears. If the error reoc-
curs after repeating the save
operation, there could be some-
thing wrong with the disk. Insert a
different disk in the drive and retry
the save operation.
NOTE
Complete
---