Yamaha PSR-450 - page 65

MIDI Functions
65
PSR-450 Owner’s Manual
2Select the local control setting mode.
Press the number button [1] to select “LOCAL”.
3Turn local control on or off.
Use the [+/YES] button to turn local control on, or
the [–/NO] button to turn local control off.
PSR-450 Panel Setting Transmission (Initial Send)
Sends the PSR-450 panel settings to an external MIDI device.
When recording a PSR-450 performance to an external sequencer or similar equip-
ment, you can use this function to send the current PSR-450 panel settings so that when
the sequence is played back the original panel settings are automatically restored.
1Use the [LEFT MENU] button to select MIDI.
If “INITSEND” is already showing on the display skip ahead to step 3.
2Select the initial send setting mode.
Press the number button [2] to select “INITSEND”.
3Transmit the panel settings.
Press the [START/STOP] button to begin transmis-
sion of the panel settings.
“End” will appear on the display when the transmis-
sion is complete.
LOCAL
on
INITSEND
End