Yamaha PSR-510 - page 61

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

–

_ _

–

_ _

■Clock Mode

Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the

PSR-510’s time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by its own inter-

nal clock, the speed of which is set by the PSR-510 [TEMPO] button. When MIDI clock reception is enabled,

however, all timing is controlled by an external MIDI clock signal received via the PSR-510 MIDI IN terminal

(the PSR-510 [TEMPO] setting has no effect).

NOTES

•If clock reception is enabled but no MIDI clock signal is received for

more than 400 milliseconds, external clock reception is automatically

disable and normal internal clock operation resumes.

•If you attempt to change the tempo setting when MIDI clock reception

is enabled, “EC” will appear on the MULTI DISPLAY.

ZPress the [RECEIVE CH/CL/COM] Button & Select “cL” ....................................................................

Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]

buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/

COM] button itself to select “cL” on the MULTI DISPLAY (“cL” is the

next step above MIDI channel 16).

XSelect the Desired Mode........................................................................................................................

Use the [+/–] button in the number-button row to select the desired start

mode. The start/stop modes are selected in sequence each time the [+/–]

button is pressed, and the selected mode number appears on the left digit of

the MULTI DISPLAY.

RECEIVE

CH/CL/

COM

MODE

................

0 RX OFF

1 MULTI

2 REMOTE

3 CHORD

4 ROOT

Mode number

XSelect the Desired Mode........................................................................................................................

Use the [+/–] button in the number-button row to select the desired clock

mode. The disable and enable modes are selected alternately each time the

[+/–] button is pressed, and the selected mode appears on the left digit of

the MULTI DISPLAY (“d” for disable; “E” for enable).

Clock mode

■Start/Stop Mode

This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,

as follows:

Mode “0” Start/stop reception disabled.

Mode “1” MIDI start and stop commands start and stop the PSR-510 Auto Accompaniment feature.

Mode “2” MIDI start and stop commands start and stop the PSR-510 SONG MEMORY feature.

ZPress the [RECEIVE CH/CL/COM] Button & Select “cd” ....................................................................