89
87
11
Edit the setup data.
Press the [NEXT] and [BACK] buttons to switch among the displays (as
shown below).
• Select a track by pressing one of the [TRACK1]-[TRACK16] buttons.
• Use the data dial, the [+/YES] button, the [-/NO] button or the number
buttons [1]-[0] to change the desired values in each display.
12
Press the [NEXT] button to display the setup data saving
screen.
13
Save the changed data to the floppy disk.
• To cancel the save operation (if you wish to redo any edits), press the [-/NO]
button and continue editing.
• To save the data to disk, press the [+/YES] button.
14
Press the [RECORD] button to exit from the Record mode.
CAUTION
• While the file is being
saved, never eject the
floppy disk or turn the
power off.
Song Recording
The Save operation is completed...
Executing 84%
Completed
•Minus settings for the Octave
and Pan parameters can be
directly entered by pressing
the appropriate number
button while holding the
[-/NO] button.
T01=001 GrandPno
Volume T01=108
Octave T01= 1
Pan T01= 63
RevDepth T01= 49
ChoDepth T01= 89
DspDepth T01= 89
[BACK] button[NEXT] button
• Voice
• Volume
• Octave
• Pan
• Reverb depth
• Chorus depth
• DSP depth
[BACK] button[NEXT] button
[BACK] button[NEXT] button
[BACK] button[NEXT] button
[BACK] button[NEXT] button
[BACK] button[NEXT] button
Setup Data OK?