152
Data Backup & Initialization
■Data Initialization
All data can be initialized and restored to the factory preset condition by turning on the
power while holding the highest (rightmost) white key on the keyboard. “Backup RAM
Clear” will appear briefly on the display.
• All registration and
User Style/Pad
memory data, plus
the other settings
listed above, will be
erased and/or
changed when the
data initialization
procedure is carried
out.
• Carrying out the
data initialization
procedure will usu-
ally restore normal
operation if the PSR-
730/630 freezes or
begins to act errati-
cally for any reason.
ON
STAND BY
rAM CleaBackup R
■Data Backup
Except for the data listed below, all PSR-730/630 panel settings are reset to their initial
settings whenever the power is turned on.
• Registration Memory
• User Style Data
• User Pad Data
• MIDI Transmit Settings
• MIDI Receive Settings
The data listed above can be backed up — i.e. retained in memory — as long as a
working set of batteries is installed and you keep the following Off/On procedure.
zTurn the power OFF by pressing the [STAND BY/ON] switch.
xUnplug the DC output cable of the PA-6 from the DC IN 10-12V jack on the rear
panel of the PSR-730/630.
cThen unplug the PA-6 Power Adaptor from the wall AC outlet.
When turning the power ON, simply reverse the procedure.