18
Playing the PSR-730/630
One- or two-digit voice numbers can be entered without leading zeros. To select
voice number “23”, for example, simply press the [2] button and then the [3] button.
The bars below the voice number on the display will flash for a few seconds, and
then disappear when the selected voice number has been recognized by the PSR-
730/630.
One- or two-digit voice numbers can also be entered with leading zeroes: e.g. “23”
can be entered as “023” by pressing the [0], [2], and [3] buttons. In this case the
specified voice number will be immediately recognized by the PSR-730/630.
●The [VOICE] Button
Pressing the [VOICE] button increments the voice number. Press briefly to
increment by one, or hold for continuous incrementing.
3Play & Adjust Volume
You can now play the selected voice on the PSR-730/630 keyboard. Use the
[MASTER VOLUME] control to adjust the overall volume level.
If the Voice Set function (page 116) is turned “on”, whenever a panel voice is
selected appropriate “R2” and “L” voices (i.e. DUAL VOICE and SPLIT VOICE
modes) as well as digital effects, etc., will be automatically selected at the same time.
• When a XG voice is
selected the XG icon
will appear below the
voice number.
• Refer to page 133 for
a complete list of the
panel and XG voices.
●The Data Dial
Simply rotate the dial clockwise to increment the voice number, or counter-
clockwise to decrement the voice number.
023
ophonep1 Xyl
123
456
789
–
/ NO
0
+
/ YES
VOICE
MIN MAX
MASTER
VOLUME
*The above illustration shows the display of
the PSR-730.