58
3Register the Settings
While holding the [MEMORY] button, press one of the REGISTRATION
MEMORY buttons — [1] through [4]. The corresponding REGISTRATION MEMOR Y
number will appear below “REGISTRATION” in the display.
• Any data that was
previously recorded in
the Registration
Memory location you
selected will be
erased and replaced
by the new settings.
• The Registration
Memory contents will
be retained even after
turning the power off.
See page 152 for the
details.
On the PSR-730, there are BANK [▼] and [▲] buttons. Pressing these buttons will
directly bring up the registration bank sub menu (example: Bank 1) of the “Regist
Memory”, main menu item, and all you have to do is add the correct number.
Registration Memory
1
BANK MEMORY
REGISTRATION MEMORY
You can give your own names (up to 8 characters) to the registration banks where
you have stored settings.
After recalling the registration settings you wish to name, use the MENU [▲] and
[▼] buttons to move the triangular indicator next to “REGIST MEMORY“ in the menu
list to the left of the display.
Then use the SUB MENU [▲] and [▼] buttons to select “Reg Naming”. The current
name will appear on the top right of the display.
Naming the Registration Banks
ist1ng: Reg
-
Reg Nami
1234
MEMORY
REGISTRATION MEMORY
REPEAT
ONE TOUCH
SETTING
REGISTRATIONMEMORY
AB
213
4
FREEZE
ist1 RegBank 01: