Adjust the Volume Balance and Changing Voices
— Mixing Console
PSR-A1000
116
Effect Block
Block Parts Characteristics Number of User Effect
REVERB All parts Reproduces the warm ambience of playing in
a concert hall or jazz club. 3
CHORUS All parts Produces a rich “fat” sound as if several parts
are being played simultaneously. 3
DSP Main, Layer, Left, Song (Ch. 1 - 16),
Style
In addition to reverb and chorus effects, this
section features a variety of special effects,
including distortion.
3
I
F
J
G
H
81 2 3 4 5 6 7
D
A
E
B
C
Determines the
effect block.
Calls up the
display for storing
the effect.
Determines the effect category.
Determines the effect type. Determines the effect parameter to be adjusted.
Determines the level of the
effect (return level). This is not
available when BLOCK is set
to “DSP,” PARAMETER is set
to “CONNECTION,” and
VALUE is set to “Insertion.”
Determines the value of the
selected parameter.
Calls up the display
for naming the User
Effect (page 42).
I
F
J
G
H
81 2 3 4 5 6 7
3
4
Select the
destination to
which the effect
is to be stored.
The number of
memory spaces
available for the
destination differs
for each block
(refer to the chart
below).
Stores the effect settings you
made above to a User Effect
location (SYSTEM) for future
recall. To call up the effect, select
USER from the CATEGORY
parameter and select the desired
effect from the TYPE parameter.
Keep in mind that in some
cases noise may result if
you adjust the effect param-
eters while playing the
instrument.
Switches between
the upper/lower
parameters. For the
lower parameter,
the depth can be
changed when the
[VARIATION]
button is on.