Yamaha PSR-K1 - page 15

Setting Up

PSR-K1 Owner’s Manual 15

Turn on the power

Turn down the volume by turning the [MASTER VOLUME]

control to the left and press the [STANDBY/ON] switch to

turn on the power.

Pressing the switch again turns the power off.

Backup data in the SmartMedia card (page 84) is

loaded to the instrument when the power is turned on.

If no SmartMedia card is inserted or if no backup data

exists on teh card, all instrument settings are restored

to the initial factory defaults when the power is turned

on.

●Music rest

• To disable automatic loading of SmartMedia card backup

data, simultaneously hold down the highest white key on

the keyboard (C6) and turn on the power. This allows you

start the instrument with the default settings yet still use

the SmartMedia card.

NOTE

• Even when the switch is in the “STANDBY” position, electric-

ity is still ﬂowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make

sure you unplug the AC power adaptor from the wall AC out-

let, and/or remove the batteries from the instrument.

• Never attempt to turn the power off when a “WRITING!” mes-

sage is shown in the display. Doing so can damage the

SmartMedia card and result in loss of data.

Insert the music rest into

the slots as shown.