4
■
■
A
POWER ON/OFF switch and indicator
After connecting the PW1D to the CS1D using the
included cable, turn this switch on to supply power to
the CS1D.
B
AC IN connector
Connect the included power cable here. Affix the
power cable plug using the attached screws so that the
cable will not be unplugged accidentally.
C
DC OUTPUT connector
Use this connector to connect the PW1D to the CS1D
to supply power to the CS1D. Turn the cable plug
clockwise to connect the cable, and turn it counter-
clockwise to disconnect the cable.
D
Ground connector
Be sure to ground the unit to avoid the risk of electrical
shock before you insert the power plug into an AC outlet.
This product comes with a 3-pin power cord. If the
ground connector of the AC outlet has already been
grounded, the unit will be grounded effectively by
using the 3-pin power cord.
Grounding the unit is also effective for preventing
hum and other noise.
■
Thank you for choosing the PW1D, a power supply unit designed for the CS1D Yamaha control surface.
To install the unit, please select a location with good ventilation. Do not block the front panel or rear panel
or you may restrict fan air flow.
Be sure to use the included special cable
to connect the unit to the
CS1D. Never use other cables to connect these units.
POWER
ON OFF
1
2
4
3
AC IN
DC OUTPUT
CONNECT
DISCON
Power supply USA and Canada : 120 V, 60 Hz
Others : 230 V, 50 Hz
Power consumption USA and Canada : 400 W, 450 VA
Others : 400 W
DC Output Voltage CS1D connected : 60V, 12V
DC Output Current CS1D connected, 60V : 5A
CS1D connected, 12V : 0.5A
Dimensions (W
×
H
×
D) 480 mm
×
97.5
mm
×
368.5 mm
Weight 9.6 kg
Operating temperature 10 – 35˚C
Cooling fan speed always fixed
Accessories dedicated connection cable 3.6m
×
1, power cable 2.5 m
×
1