Owner’s Manual
5
English
• When turning on the AC power in your audio system, always turn on the power
amplifier LAST, to avoid speaker damage. When turning the power off, the power
amplifier should be turned off FIRST for the same reason.
• Do not insert your fingers or hands in any gaps or openings on the device
(vents, ports, etc.).
•Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any
gaps or openings on the device (vents, ports, etc.) If this happens, turn off the
power immediately and unplug the power cord from the AC outlet. Then have
the device inspected by qualified Yamaha service personnel.
•Do not rest your weight on the device or place heavy objects on it, and avoid use
excessive force on the buttons, switches or connectors.
Always turn the power off when the device is not in use.
Do not turn the POWER switch on and off repeatedly and rapidly. Be sure to wait 10 seconds or more between turning the power to the unit off and then on.
The performance of components with moving contacts, such as switches, and connectors, deteriorates over time. Consult qualified Yamaha service personnel about replacing
defective components.
Specifications and descriptions in this owner’s manual are for information purposes only.
Yamaha Corp. reserves the right to change or modify products of specifications at any time without prior notice. Since specifications, equipment or options may not be the
same in every locale, please check with your Yamaha dealer.
European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 70 A
Conforms to Environments: E1, E2, E3, E4
Handling caution
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.
The PW8 has been specifically designed for use with Yamaha professional equipment. Refer to the owner's manual supplied with your mixer to determine if it is
compatible with the PW8.
Use the cable supplied with the mixer to be connected to connect the PW8 to your mixer.
When parallel-connecting two PW8 units, use the optional PSL1010 Power Supply Link Cable to connect the second PW8 to the main PW8 unit.
(5)-5
2/2