50 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5Easy Accompaniment for Other Instruments
During playback you can move the cursor up to the pattern number,
select a different pattern, then move the cursor back to the chord sym-
bol and try different chords with the new pattern.
HINT
If you move the cursor to the “Trns” (transpose) parameter, you can use
then [
−
1] and [+1] buttons to transpose the pitch of the entire pattern up
or down in semitone increments over a range of two octaves. A transpose
setting of “+00” produces normal pitch.
Stop playback by pressing the [/] key. You can also stop play-
back after an appropriate ending by selecting the ENDING section
(the cursor must be on the pattern number or section name to do this).
VTry out the various chords
with different patterns.
BStop playback when done.