60 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5Easy Accompaniment for Other Instruments
CSelect the step record
mode. Move the cursor to the “REC REAL STEP” area of the display,
then press the right cursor key to select the “STEP” mode (if it isn’t
already selected). The selected record mode is indicated by a pair of
arrows on either side of the mode name — i.e. “>STEP<”. Once
selected, move the cursor vertically to move to other areas of the
screen. The arrows will remain positioned at the selected mode no
matter where you move the cursor.
Move the cursor to the track area of the display, and then shift the
cursor sideways to select “Pat”, “Chd”, “Rpt”, or “Tmp”. Once se-
lected, move the cursor vertically if you want to move to other areas
of the screen. An underline will remain below the selected track no
matter where you move the cursor.
Cursor here to select the step
record mode.
VSelect “Pat”, “Chd”,
“Rpt”, or “Tmp”.
Select “Pat” to record pattern changes, “Chd” to
record chord changes, “Rpt” to record repeats,
or “Tmp” to record tempo changes.