OPERATIONS

3

1,6 2

4 7

TO PLAY A SOURCE

1

VOLUME

 

∞0

— dB

Set to the “∞ ” position.

2

POWER

 

3 Select a desired input source.

TAPE

 

 

INPUT

 

 

 

 

 

 

 

 

MONITOR

TUNER

 

 

CD

PHONO

 

 

 

 

AUX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*The name of the selected input source will appear in the display.

*Note that pressing on each input selector selects the source which is connected to the corresponding input terminals on the rear panel.

4 Select the speakers to be used.

SPEAKERS

A B

ON ON

OFF OFF

*If you use two speaker systems, press both the A and B switches.

5

Play the source. (For detailed information on the tuning

 

operations, refer to the page 10.)

 

 

6

VOLUME

∞

0

 

— dB

Adjust to the desired output level.

7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 9.)

Note

If both TAPE MONITOR and another input selector is selected, TAPE MONITOR has priority over another.

7