Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha R-V1103 CAUSE, REMEDY, Others, SYMPTOM, not work, FM antenna, hissing noises, longer be tuned in, (especially in the evening), FM stereo reception is noisy

1 59

Download 59 pages, 925.38 Kb

		SYMPTOM	CAUSE	REMEDY

		FM stereo reception is noisy.	Because of the characteristics of FM stereo	Check the antenna connections.
			broadcasts, this is limited to cases where the	Try using a high quality directional FM
			transmitter is too far away or the antenna	antenna.
			input is poor.	Set the TUNING MODE button to the manual
				tuning mode.

	FM	There is distortion and clear reception	There is multipath interference.	Adjust antenna placement to eliminate
	FM	cannot be obtained even with a good		multipath interference.
		FM antenna.
		A desired station cannot be tuned in	The station is too weak.	Use the manual tuning method.
		with the automatic tuning method.		Use a high quality directional FM antenna.

		Previously preset stations can no	This unit has been unplugged for a long	Repeat the presetting procedure.
		longer be tuned in.	period.

		A desired station cannot be tuned in	Weak signal or loose antenna connections.	Tighten the AM loop antenna connections
		with the automatic tuning method.		and rotate it for best reception.

				Use the manual tuning method.
	AM
		There are continuous crackling and	Noises will result from ligtning, fluorescent	Use an outdoor antenna and a ground wire.
		hissing noises.	lamps, motors, thermostats and other	This will help somewhat but it is difficult to
		hissing noises.	lamps, motors, thermostats and other	This will help somewhat but it is difficult to
			electrical equipment.	eliminate all noise.

		There are buzzing and whining noises	A television set is being used nearby.	Relocate this unit away from the TV.
		(especially in the evening).

	Remote control transmitter	The remote control transmitter does	Direct sunlight or lighting (of an inverter type	Change the position of the main unit.
		not work.	of fluorescent lamp etc.) is striking the remote
			control sensor of the main unit.

			The batteries of this remote control	Replace the batteries with new ones.
			transmitter are too weak.
			transmitter are too weak.
	Others	The sound is degraded when listening	This unit is in the standby mode.	Turn the power to this unit on.
		with the headphones connected to the
		compact disc player or cassette deck
		that are connected with this unit.
		that are connected with this unit.

54

Contents

Natural Sound AV Receiver Récepteur audiovisuel “Son Naturel” OWNER’S MANUAL MODE D’EMPLOI SAFETY INSTRUCTIONS CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE We Want You Listening For A Lifetime (for US customers only) CONTENTS SUPPLIED ACCESSORIES FEATURES CAUTION : READ THIS BEFORE OPERATING YOUR UNIT 3.Never open the cabinet. If something drops into the set, contact your dealer Always set the VOLUME control to 12.AC outlet 13.Voltage Selector (China and General Models only) NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range 30° Battery replacement PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Digital (AC-3) Dolby Surround + DSP (CINEMA DSP) Dolby Pro Logic + 2 Digital Sound Fields Dolby Digital (AC-3)+ 3 Digital Sound Fields SPEAKER SETUP SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT Main speaker Center speaker Rear speaker Subwoofer CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS AC* OUTLET(S) (SWITCHED) (U.S.A., Canada, Singapore, China and General models) 2 SWITCHED OUTLETS For Custom Installer REMOTE CONTROL (IN, OUT) terminals These terminals are used for custom installation system When this unit is connected to the components for custom installation system, you can operate this unit with the nCONNECTING TO DIGITAL (OPTICAL AND COAXIAL) TERMINALS DIGITAL OUT ANALOG Notes on connecting with an LD player equipped with an AC-3RF output nCONNECTING TO S VIDEO SIGNAL TERMINALS S VIDEO SIGNAL S VIDEO SIGNAL VCR IN OUT S VIDEO SIGNAL MONITOR OUT CONNECTING SPEAKERS How to Connect: nOUTPUT terminals (for driving speakers with external amplifiers) nIMPEDANCE SELECTOR switch ANTENNA CONNECTIONS CONTROLS AND THEIR FUNCTIONS ABASS EXTENSION switch BTONE BYPASS switch Preset station number selector buttons Select a preset station number (1 to 8) DTone controls DISPLAY PANEL 70mm A B 1Multi-informationdisplay 6Signal-levelmeter ADJUSTMENTS BEFORE USING THIS UNIT METHOD OF CHANGING SELECTIONS TIME/LEVEL·SET MENU SPEAKER BALANCE ADJUSTMENT Set to the “∞ ” position 2 Turn the power on 3 Select the main speakers to be used *If you use two main speaker systems, press both the A and B switches 8 Turn up the volume Main (L) Center Main (R) Rear (R) ADJUSTMENTS IN THE “SET MENU” MODE DESCRIPTIONS OF THE FUNCTIONS 1.CENTER DELAY (Adjusting the delay of center sounds (dialog etc.)) Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms This adjustment is effective only when the Dolby Digital BASIC OPERATIONS TO PLAY A SOURCE Switching the input mode (for DVD/LD and TV/DBS) When you finish using this unit Notes on using the input selector buttons To select the source connected to the The selection of TO RECORD A SOURCE TO TAPE (OR MD) 1 Select the source to be recorded 2 Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to the page 32.) Selecting the SPEAKER system Adjusting the BALANCE control Adjusting the BASS and TREBLE controls Using the TONE BYPASS switch TUNING OPERATIONS PRESET TUNING MANUAL PRESET TUNING AUTOMATIC PRESET TUNING EXCHANGING PRESET STATIONS USING DIGITAL SOUND FIELD PROCESSOR (DSP) PLAYING A SOURCE WITH AN EFFECT OF THE DIGITAL SOUND FIELD PROCESSOR (DSP) Lights up when the Digital Sound Field Processor is turned on 3 DIGITAL DSP PRO LOGIC Lights up when the Dolby Pro Logic Surround is being decoded If the input signals of source encoded with the Dolby Digital (AC are in ADJUSTING DELAY TIME AND EACH SPEAKER OUTPUT LEVEL Note D E L A Y C E N T E R R S U R Page BRIEF OVERVIEW OF DIGITAL SOUND FIELD PROGRAMS TV SPORTS STADIUM DISCO ROCK CONCERT JAZZ CLUB SETTING THE SLEEP TIMER REMOTE CONTROL TRANSMITTER BASIC OPERATIONS (When the lid is open) Page LEARNING NEW CONTROL FUNCTIONS (When the lid is open) USING OPERATION CONTROL KEYS (When the lid is closed) MUTE Examples of operations controlled by using the OPERATION CONTROL keys To operate a Yamaha CD player To operate your VCR Selected input selector MACRO OPERATIONS (When the lid is closed) Function of the key (and area) which operates when a macro key is pressed Macro key 1st 2nd 3rd LEARNING A NEW FUNCTION MAKING A NEW MACRO CLEARING LEARNED FUNCTIONS TROUBLESHOOTING FM stereo reception is noisy cannot be obtained even with a good FM antenna A desired station cannot be tuned in with the automatic tuning method SPECIFICATIONS AUDIO SECTION SECTION AUDIO