|
|
|
|
| |||||||
8 | 9 | REC/PAUSE | STOP | DECK A/B | VCR MON |
|
| REC/PAUSE | STOP | DECK A/B VCR MON |
|
CENTER | PRO LOGIC | ENHANCED | CNCT VIDEO |
|
| CENTER | PRO LOGIC | 3 STEREO |
| ||
| 7 | MODE |
| 7 | MODE |
| |||||
| + |
| SUR. |
|
| + |
| SUR. |
| ||
| MONO MOVIE | ROCK | HALL |
| HALL | ROCK |
| ||||
|
| DELAY | EFFECT | — VOLUME + | 9 |
| DELAY | EFFECT | — VOLUME + | 9 | |
|
| TIME | ON/OFF |
| TIME | ON/OFF | |||||
|
|
|
|
| |||||||
|
| — |
|
|
|
|
| — |
|
|
|
7 Select the center channel output mode according to your speaker configuration.
(Refer to “SPEAKER CONFIGURATION” on page 6.)
CENTER | NORMAL |
MODE |
WIDE
PHANTOM
On the feature of each mode, refer to the “Note” shown below.
Note
In step 7, when you select the center channel output mode, note the following.
For 5 speaker configuration)
NORMAL: Select this mode when you use a center speaker that is smaller than the front speakers. In this mode, the bass tone will be output from the front speakers.
WIDE: Select this mode when you use the center speaker approximately same sized as the front speakers.
For 4 speaker configuration)
PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right front speakers.
*
When the DOLBY 3 STEREO program is used, the PHANTOM mode cannot be selected.
8
TEST
TEST
Flashes continuously.
9 Turn up the volume.
You will hear a test tone (like pink noise) from the left front speaker, then the center speaker, then the right front speaker, and then the rear speakers, for about two seconds each. The display changes as shown below.
Front (L) Center
Rear | Front (R) | (L and R) |
(L and R) |
|
|
*The test tone from the left rear speaker and the right rear speaker will be heard at the same time.
12