OPERATIONS

3

1,6

2

4 7

TO PLAY A SOURCE

1

VOLUME

 

0

— dB

Set to the “∞ ” position.

2

POWER

 

3 Select a desired input source.

 

 

 

MONITOR

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

AUX

TUNER

CD

PHONO

TAPE 2

 

TAPE 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COPY

*The name of the selected input source will appear in the display.

*Note that pressing on each input selector selects the source which is connected to the corresponding input terminals on the rear panel.

4 Select the speakers to be used.

SPEAKERS

A B

ON ON

OFF OFF

*If you use two speaker systems, press both the A and B switches.

5

Play the source. (For detailed information on the tuning

 

operations, refer to the page 10.)

 

 

6

VOLUME

0

— dB

Adjust to the desired output level.

7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 9.)

Note

In the step 3, if two or more program sources are selected at the same time (by using input selectors), be sure to remember the priority order of the input sources.

Priority order of sources: 1) TAPE 1, 2) TAPE 2, 3) AUX, TUNER, CD or PHONO.

●If you select AUX, TUNER, CD or PHONO, be sure that TAPE 1 and/or TAPE 2 are not being selected.

●If you select TAPE 1 and TAPE 2 at the same time, the result will be the sound from the tape deck 1.

●If you select both AUX and TAPE 1 at the same time, the result will be the sound from the tape deck 1.

7