PRESET TUNING

MANUAL PRESET TUNING

This unit can store station frequencies (selected by tuning operation) by using the PRESET STATIONS buttons. With this function, you can recall any desired station by only pressing the corresponding PRESET STATIONS button. Up to 40 stations (8 stations x 5 groups) can be stored.

2, 1

4, 2

3

To store stations

1 Tune to a desired station.

(Refer to the previous page for tuning procedure.)

2 Select a desired group (A – E) of preset stations confirming it on the display.

A/B/C/D/E

PRESET

3 MEMORY

FM

MEMORY

Flashes on and off for about 5 seconds.

4 Select a preset station number where you want to program the station before “MEMORY” goes off from the display.

PRESET STATIONS

1 2 3 4

6 7 8

PRESET

FM

MHz

 

 

 

 

 

 

 

 

 

0

20 40 60 l00

Shows the displayed station has been programmed to A1.

*In the same way, program other stations to A2, A3 ... A8.

*You can program more stations to preset station numbers on other groups in the same way by selecting other groups in step 2.

To recall a preset station

1 Select the group of preset stations.

A/B/C/D/E

PRESET

2 Select the preset station number.

PRESET STATIONS

1 2 3 4

6 7 8

PRESET

Notes

●A new setting can be programmed in place of the former one.

●For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency.

Memory back-up

The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is set off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the PRESET TUNING steps.

18