26 En
CONNECTIONS
Once all connections are complete, plug the power cable into the AC wall outlet.
■AC OUTLET (SWITCHED)
Use this outlet to supply power to any connected
components. Connect the power cable of another
component to this outlet. Power to this outlet is supplied
when the main zone or Zone 2 is turned on. However,
power to this outlet is cut off when the main zone and
Zone 2 are turned off or when MASTER ON/OFF on the
front panel is pressed and released outward to the OFF
position. For information on the maximum power, see
“SPECIFICATIONS” on page123.
Connecting the power cable
AC OUTLETS
AC OUTLETS
To the AC wall outlet
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, the stored data will be lost in case the power
cable is disconnected from the AC wall outlet or if the
power supply is cut off for more than one week.