Yamaha RX-V340 SOUND 2 SP DISTANCE, (speaker distance), SOUND 3 LFE LEVEL, SOUND 4 D. RANGE, (dynamic range), ■Setting by “meters”, ■Setting by “feet”

SET MENU

SOUND 2 SP DISTANCE

(speaker distance)

Use this feature to adjust the delay applied to center channel sounds. This feature works when there is sound output from the center speakers with a source such as Dolby Digital or DTS. Ideally, the center speaker should be the same distance from the main listening position as the left and right main speakers. However, in most home situations, the center speaker is placed in line with the main speakers. By delaying the sound from the center speaker, you can adjust the apparent distance from the center speaker to the main listening position to make it seem the same as the distance between the listening position and main left and right speakers.

1 Press u / dto select “UNIT”.

2 Press j / i to select the unit “meters” or “feet” to be used in setting.

3 Press u / dto select the speaker for which you want to adjust the delay.

4 Press j / i to set the delay.

Press ifor higher values and jfor lower values.

Center speaker image

C

L C R

RLRR

SOUND 3 LFE LEVEL

Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The LFE signal carries low- frequency special effect sound which is only added to certain scenes.

Control range:
SPEAKER ............	–20 to 0 dB
HEADPHONE .....	–20 to 0 dB
Initial setting: 0 dB

1 Press u / dto select the item to be adjusted.

2 Press jto adjust the LFE level.

Note

•Adjust the LFE level according to the capacity of your subwoofer or headphones.

SOUND 4 D. RANGE

(dynamic range)

Use this feature to adjust the dynamic range. This setting is effective only when the unit is decoding Dolby Digital signals.

Choices: MAX, STD (standard), MIN (minimum)

MAX

Select MAX for feature films.

STD

Select STD for general use.

MIN

Select MIN for listening to sources at low volume levels.

■Setting by “meters”

Control range:	0.3 to 24.00 m (for main L/R,
	center, rear L/R)
Initial settings:	3.00 m (for main L/R, center,
	rear L/R)

■Setting by “feet”

Control range:	1 to 80 ft (for main L/R, center,
	rear L/R)
Initial settings:	10.0 ft (for main L/R, center,
	rear L/R)

Note

•No delay will be set if you set the same distance for the main L/R, center and rear L/R.

40