CONFIGURATIONS Configuring the system settings (ADVANCED SETUP menu) En 65
Configure the system settings of the unit while viewing the front display.
1Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z
(power).
3Press PROGRAM to select an item.
4Press STRAIGHT to select a setting.
5Press z(power) to set the unit to standby mode and turn it on again.
The new settings take effect.
ADVANCED SETUP menu items
Changing the speaker impedance setting (SP IMP.)
(U.S.A. and Canada models only)
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Settings
Selecting the remote control ID (REMOTE ID)
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
Changing the remote control ID of the remote control
(Australia model only)
For information on how to change the remote control ID of the remote control, refer to “Supplement for
Remote Control” on the supplied CD-ROM.
1To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for 3
seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for 3
seconds.
Configuring the system settings
(ADVANCED SETUP menu)
Item Function Page
SP IMP. (U.S.A. and Canada models only)
Changes the speaker impedance setting. 65
REMOTE ID Selects the unit’s remote control ID. 65
TU (Asia and General models only)
Changes the FM/AM tuning frequency setting. 66
TV FORMAT Switches the video signal type of HDMI output. 66
INIT Restores the default settings. 66
UPDATE Updates the firmware. 66
VERSION Checks the version of firmware currently installed on the unit. 66
z(power)
STRAIGHTPROGRAM
6 MIN Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
8 MIN (default) Select this option when you connect 8-ohm or higher speakers to the
unit.
SPIMP.8MIN
REMOTEIDID1