Yamaha RX-V390, RX-V490 3 —3, To play a source with the digital sound field processor

To play a source with the digital sound field processor

3 2

1 Follow steps 1 – 6 shown in “BASIC OPERATIONS” on page 14.

2 Turn the DSP on, so that a program name appears on the display.

EFFECT

PRO LOGIC

3 Select the desired program that is suitable for the source.

PROGRAM

TEST

The selected program name is shown on the display.

4 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on 24 and 25.)

	RX-V490					RX-V390
REC/PAUSE	STOP	DECK A/B	VCR MON		REC/PAUSE STOP		DECK A/B	VCR MON
					REC/PAUSE STOP		DECK A/B	VCR MON
CENTER	PRO LOGIC	ENHANCED	CNCT VIDEO	2	CENTER			2
MODE	PRO LOGIC	ENHANCED	CNCT VIDEO		CENTER	PRO LOGIC	3 STEREO
					MODE	PRO LOGIC	3 STEREO
+		SUR.					SUR.
+	MONO MOVIE	ROCK	HALL		+	HALL	SUR.
					+	HALL	ROCK
DELAY	EFFECT	— VOLUME +			DELAY	EFFECT
TIME	ON/OFF	— VOLUME +			DELAY	EFFECT	— VOLUME +
					TIME	ON/OFF	— VOLUME +

—

3 —3

Notes

●If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect.

●When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

RX-V490

●When CONCERT VIDEO, MONO MOVIE, ROCK CONCERT or CONCERT HALL is selected, no sound is heard from the center speaker.

●When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.

RX-V390

●When ROCK or HALL is selected, no sound is heard from the center speaker.

●When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY 3 STEREO, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. For DOLBY PRO LOGIC only, however, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.