Yamaha RX-V4/390 Center and rear speakers, RX-V490, RX-V390

1 31

Connect the respective speakers to this unit as figured below.

Center speaker

Only one rear speaker can also be used in place of two rear speakers.

For connecting one rear speaker, follow the method shown below.

Rear speaker

REAR

CENTER

REAR

REAR SINGLE

Contents

CONTENTS SAFETY INSTRUCTIONS Note to CATV system installer: Caution: Read this before operating your unit We Want You Listening For A Lifetime Power, 0.04% THD, 20–20,000Hz PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP RX-V490only SPEAKER SETUP SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT CONNECTIONS Center and rear speakers For connecting speakers ABOUT THE ACCESSORY TERMINALS ANTENNA CONNECTIONS SPEAKER BALANCE ADJUSTMENT Page Page BASIC OPERATIONS TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE) When you listen with headphones TUNING OPERATIONS PRESET TUNING MANUAL PRESET TUNING AUTOMATIC PRESET TUNING EXCHANGING PRESET STATIONS USING DIGITAL SOUND FIELD PROCESSOR (DSP) Front Panel Remote Control Transmitter Description of Each Sound Field Program To play a source with the digital sound field processor 3 —3 Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER REMOTE CONTROL TRANSMITTER KEY FUNCTIONS For Control of This Unit For Other Component Control NOTES ABOUT THE REMOTE CONTROL TRANSMITTER TROUBLESHOOTING SPECIFICATIONS AUDIO SECTION VIDEO SECTION FM SECTION AM SECTION