Yamaha RX-V392, RX-V492 English, CONTINUED

	l6
20	l2
28	8
40	4
60	2
	0
	–dB

8 6 7

6 Select the center channel output mode suitable for your speaker configuration.

(Refer to “SPEAKER CONFIGURATION” on page 7.)

CENTER

MODENORMAL

WIDE

PHANTOM

On the feature of each mode, refer to the “Note” shown below.

Note

In step 6, when you select a center channel output mode, note the following.

For 5 speaker configuration)

NORMAL: Select this mode when you use a center speaker that is smaller than the main speakers. In this mode, the bass tone will be output from the main speakers.

WIDE: Select this mode when you use the center speaker approximately same sized as the main speakers.

For 4 speaker configuration)

PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right main speakers.

RX-V492						RX-V392				English
–	TIME/	+	DELAY/CENTER		EFFECT	–DELAY TIME+			TEST	EFFECT
	LEVEL		/REAR	TEST
	PROGRAM		PROLOGIC ENHANCED		ON/OFF	PROGRAM		PROLOGIC ENHANCED		ON/OFF
			VCR	TV/DBS DVD/LD				VCR		VIDEO
DIR A DIR B		REC/PAUSE		PLAY		DIR A DIR B	REC/PAUSE		PLAY
				A/B	TAPE				A/B	TAPE
–	PRESET	+	A/B/C/D/E		TUNER	– PRESET	+	A/B/C/D/E		TUNER
		DISC		PLAY	CD		DISC		PLAY	CD
					PHONO				PHONO
	POWER		VOLUME			POWER		VOLUME
SLEEP						SLEEP

77

7 Turn up the volume.

	VOLUME
	l6
20	l2
28	8
40	4

602

0

–dB

You will hear a test tone (like pink noise) from the left main speaker, then the center speaker, then the right main speaker, and then the rear speakers, for about two seconds each. The display changes as shown below.

Main (L) Center

Rear (L and R) Main (R)

*The test tone from the left rear speaker and the right rear speaker will be heard at the same time.

8 Adjust the BALANCE control so that the effect sound output level of the left main speaker and the right main speaker are the same.

BALANCE

l	0	l
2		2
3		3
4		4
L 5		5 R

CONTINUED

21