Adjustment of DELAY TIME

You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the effect sound from the rear speakers.

The larger the value, the later the effect sound is generated. This adjustment can be made to all programs individually.

 

 

 

 

PRO LOGIC

: from 15 to 30 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

 

 

 

 

PRO LOGIC

: from 15 to 30 milliseconds

 

 

 

ENHANCED

(Preset value:

20 milliseconds)

CONCERT VIDEO

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

28 milliseconds)

MONO MOVIE

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

20 milliseconds)

STADIUM

: from 1 to 50 milliseconds

 

 

 

 

 

(Preset value:

45 milliseconds)

DISCO

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

14 milliseconds)

ROCK CONCERT

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

17 milliseconds)

CONCERT HALL

: from 1 to 100 milliseconds

 

 

 

 

 

(Preset value:

30 milliseconds)

RX-V493

1 Press once or more so that “DELAY” appears on the display.

DELAY/CENTER

/REAR/SWFR

ms

2 By continuously pressing the “+” or “–” side of the TIME/LEVEL button, the value changes continuously. The value stops changing momentarily at the preset point.

TIME/LEVEL

ms

Adjustable

Notes

●When the TIME/LEVEL button is pressed, sound is momentarily interrupted.

●Adding too much delay will cause an unnatural effect with some sources.

RX-V393

This adjustment can be made by only using the remote control transmitter.

DELAY TIME

ms

Adjustable

Notes

● When the DELAY TIME key is pressed, sound is momentarily interrupted.

● Adding too much delay will cause an unnatural effect with some sources.

Notes

RX-V493 only

 

RX-V393 only

The values of the delay time, center level, rear level and subwoofer output level you set the last time will remain memorized even when this unit is in the standby mode. However, if the power cord is kept disconnected for more than one week, these values will be automatically changed back to the original factory settings.

The value of the delay time you set the last time will remain memorized even when this unit is in the standby mode. However, if the power cord is kept disconnected for more than one week, these values will be automatically changed back to the original factory settings.

36