CONTROLS AND FUNCTIONS

Display

1t indicator

The “ t” indicator lights up when the built-in DTS decoder is turned on.

2DSP program indicators

The name of the selected DSP program lights up in the following cases:

•When the tuner is selected as the input source.

•When DSP program No. 2, 3 or the subprogram “ENHANCED” of No.1 is selected.

6 g and o indicators

“ g ” lights up when the built-in Dolby Digital decoder is on and the signals of the selected source are encoded with Dolby Digital. “ o ” lights up when the built-in Dolby Pro Logic decoder is on.

7 x indicator

“ x ” lights up when the built-in digital sound field processor is on.

8MEMORY indicator

3Multi-information display

This display shows various information: for example the name of the selected DSP program and the various settings during adjustment with the SET MENU. The current station frequency and band (FM or AM) also appear when the tuner is selected as the input source.

4Input source indicators

One of the arrows for these indicators lights up depending on which source is selected.

This flashes for about five seconds after pressing MEMORY. During this period, the displayed station can be stored in the memory.

9AUTO indicator

This lights up when the unit is in the automatic tuning mode.

0STEREO indicator

This lights up when an FM stereo broadcast with sufficient signal strength is being received.

5TAPE/MD MONITOR indicator

This lights up when the tape deck or MD recorder, etc. is selected as the input source by pressing TAPE/MD MON / EXT. DECODER (or TAPE/MD).

qSignal-level indicator

This indicates the signal level of the station being received. If multipath interference is detected, the indication decreases.

wSLEEP indicator

This lights up while the built-in SLEEP timer is on.

6