SET MENU
4 D. RANGE (dynamic range)
Use this feature to adjust the dynamic range. This setting is effective only when this unit is decoding Dolby Digital signals.
Choices: MAX, STD (standard), MIN (minimum)
MAX
Select the “MAX” for feature films.
STDSelect the “STD” for general use.
MINSelect the “MIN” for listening to sources at low volume levels.
5 L/R BALANCE (balance of the
main left and right speakers)
Use this feature to adjust the balance of the output level from the main left and right speakers.
Control range: 20 steps for L/R
Initial setting: 0 dB for L/R
1
Press i to decrease the output level for the main left speaker. Press j for the main right speaker.
control)
Use this feature to adjust the level of the bass and treble when you use your headphones.
Control range (dB): |
|
BASS ............... | |
TRBL (treble) .. | |
Initial setting: |
|
BASS ............... | 0 dB |
TRBL ............... | 0 dB |
7I/O ASSIGN (input/output assignment)
It is possible to assign jacks according to the component to be used if this unit’s COMPONENT VIDEO input jack or DIGITAL INPUT/OUTPUT jack settings (component names for jacks) differ from that component. This makes it possible to change the jack assignment and effectively connect more components.
Once you assign, you can select that component with INPUT l/ h(or the input selector buttons on the remote control).
■RX-V530 7A CMPNT-V INPUT for COMPONENT VIDEO INPUT jacks
Choices: | [A] DVD, |
[B]DVD,
■RX-V530 7B OPTICAL OUT for OPTICAL OUTPUT jack
Choices: | (1) |
|
■7C OPTICAL IN for OPTICAL INPUT jacks
| ||
Choices: | (2) | |
|
| |
|
| (3) |
|
| |
|
| (4) |
|
| |
|
| |
|
| |
Choices: | (1) | |
|
| |
■7D COAXIAL IN for COAXIAL INPUT jack
Choices: | (5) | |
|
| |
|
| |
|
| |
Choices: | (2) | |
|
| |
Notes
•You cannot select an item more than once for the same type of jack.
•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
44