English
+10 TEST
0
TIME/LEVEL
DELAY
CENTER
REAR
SWFR
SLEEP 2CH/6CH
SYSTEM
POWER
TV
| l6 |
20 | l2 |
28 | 8 |
40 | 4 |
602
0
VCR
OFF
MASTER VOLUME
| 7 | REMOTE CONTROL | |
9 | TRANSMITTER | ||
8 | |||
|
|
7 Select the center channel output mode suitable for your speaker configuration.
(Refer to “SPEAKER CONFIGURATION” on page 7.)
CENTER
MODENORMAL
WIDE
PHANTOM
On the feature of each mode, refer to the “Note” shown below.
Note
In step 7, when you select a center channel output mode, note the following.
For 5 speaker configuration)
NORMAL: Select this mode when you use a center speaker that is smaller than the main speakers. In this mode, the bass tone will be output from the main speakers.
WIDE: Select this mode when you use the center speaker approximately same sized as the main speakers.
For 4 speaker configuration)
PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right main speakers.
8 Turn up the volume.
You will hear a test tone (like pink noise) from the left main speaker, then the center speaker, then the right main speaker, and then the rear speakers, for about two seconds each. The display changes as shown below.
Main (L) | Center |
Rear (L and R) | Main (R) |
*The test tone from the left rear speaker and the right rear speaker will be heard at the same time.
9 Adjust the BALANCE control so that the effect sound output level of the left main speaker and the right main speaker are the same.
BALANCE
l | 0 | l |
| ||
2 |
| 2 |
3 |
| 3 |
4 |
| 4 |
L 5 |
| 5 R |
21