27
EnglishB ASIC OPERATION
ADV ANCED OPERA
TION APPENDIXINTRODUCTION PREPARATION
5Press PRESET/TUNING h once to tune in to a
higher frequency or l once to tune in to a
lower frequency.
Press the button again if the tuning search does not stop
at the desired station.
y
• Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak).
• When tuned in to a station, the frequency of the received station is
shown on the display. If an RDS station that offers the PS data
service is being received, the station name is shown instead of the
frequency on the display.
Manual Tuning
1Use INPUT SELECTOR to
select the tuner as the
input source.
2Press FM/AM to select the reception band (FM
or AM).
“FM” or “AM” appears on the display.
3Press TUNING MODE so that the “AUTO”
indicator goes off.
4Press PRESET/TUNING (EDIT) to turn “ z ” off.
5Press PRESET/TUNING h or l to tune in to
the desired station.
To continue the tuning search, hold down the button.
Note
• If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality.
TUNING
LR
–+–+
32
1
4
5
Automatic tuning is effective when station signals are
strong and there is no interference. However, if the signal
from the station you want to select is weak, you must tune
in to it manually (manual tuning).
Automatic Tuning
1Use INPUT SELECTOR to
select the tuner as the
input source.
2Press FM/AM to select the reception band (FM
or AM).
“FM” or “AM” appears on the display.
3Press TUNING MODE so that the “AUT O”
indicator lights up on the display.
4Press PRESET/TUNING (EDIT) to turn “ z ” off.
Lights up
Goes off
T urn “ z ” off
T urn “ z ” off
or
or
0105V596RDS27-30_EN 2/29/0, 3:29 PM27