CONNECTING THE REAR SPEAKERS AND THE CENTER SPEAKER(S) TO THIS UNIT
Connect the REAR speakers to the REAR SPEAKERS terminals of this unit.
Connect the CENTER speaker to the CENTER SPEAKERS terminals. If you will be using one CENTER speaker, connect it to either the C or D terminals and set the CENTER speaker switch so that it is released outward (“C OR D” position). If using two CENTER speakers, connect them to the C and D terminals, and press the switch inward (“C +D” position). If, however, you will not be using a CENTER speaker, be sure to set the CENTER SPEAKER mode to “PHNTM” (phantom). (See page 35.)
NOTE: The speaker connections above are fine for most applications. If for some reason, however, you wish to use an external power amp for either or both of the rear and center channels, connect the line level output jack(s) for each channel to the INPUT jacks of the external amp and connect the corresponding speaker pair to the speaker terminals of the external amp.
Center speaker
Center speaker |
| Center speaker | ||
|
|
|
|
|
This unit
| L | R |
|
|
Rear speaker | Rear speaker | |||
32