CONNECTING AND CONTROLLING ROOM 2 EQUIPMENT

You can make up a multi-room audio/video system with this unit. In this system, this unit and Yamaha audio/video units

A Sample of system configuration and connections

connected to this unit in the main room can be controlled so that they sends audio and video signals (different from ones you are listening to and/or watching in the main room) to the amplifier, monitor TV, etc. in the second room.

CONNECTIONS

Main Room

LD player etc.

This unit

To use the multi-room functions of this unit, you need the following additional optional products:

●An infrared signal receiver for the second room

●An infrared emitter in the main room

This emitter transmits the infrared signals from the remote control unit in the second room to the other components in the main room (for example, CD player or LD player).

●An amplifier and speakers for the second room

●A video monitor for the second room

*1

REMOTECONTROL OUT

SIGNALAUDIOROOM 2 OUT SIGNALVIDEOROOM 2 OUT REMOTECONTROL IN

Infrared emitter

 

NOTE

Since there are so many ways to connect and use this unit in a multi-room installation, we recommend that you consult with a custom installation specialist for the Room 2 connections which will best meet your requirements.

1

*via the REMOTE CONTROL OUT jacks. If you own these products, the use of an infrared emitter may not be necessary.:Some Yamaha models are able to connect directly to this unit

Second Room

Amplifier

Monitor TV

 

Remote control unit

Infrared signal receiver

38