Notes on using the input selector buttons
•Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel.
*To select the source connected to the VIDEO AUX terminals on the front panel, press VIDEO AUX.
•Once you play a video source, its video image will not be interrupted even if the input selector button for an audio source is selected.
•When you select an input source by pressing the corresponding input selector button, the DSP program (or the state of no DSP program is used) which was used when the same input source was selected the last time will automatically recalled.
Switching the input mode (for DVD/LD and TV/DBS)
This unit allows you to switch the input mode only for sources connected to the DVD/LD and TV/DBS input jacks (on the rear of this unit) that input two or three types of signals to this unit.
The following two input modes are provided.
AUTO: For the source connected to the DVD/LD input jacks:
This mode is automatically selected when you turn on the power of this unit. In this mode, input signal is automatically selected by the following order of priority.
1.Digital input signal from the OPTICAL jack
2.Digital input signal from the COAXIAL jack
3.Analog input signal
For the source connected to the TV/DBS input jacks:
This mode is automatically selected when you turn on the power of this unit if the “AUTO” position is selected on “8. INPUT MODE” in the SET MENU mode. (See page 44 for details.) In this mode, input signal is automatically selected by the following order of priority.
1.Digital input signal from the COAXIAL jack
2.Analog input signal
ANALOG:
In this mode, only analog input signal is selected even though digital signal is input at the same time.
Select this mode when you want to use the analog input signal instead of the digital input signal.
NOTE: For the TV/DBS source only, the input mode selected on the function “8. INPUT MODE” in the SET MENU mode is selected when you turn on the power of this unit.
46