Notes on input mode selection

•To play back a source with the Dolby Digital (AC-3) decoded, set the input mode to “AUTO”.

•When you want to enjoy a source which has normal 2-channel signals with a Dolby Pro Logic Surround program, select the ANALOG mode.

•In the AUTO mode, there may be a case depending on some LD players or DVD players that when you make a search on a source encoded with the Dolby Digital (AC-3) during the play and then the play is restored, sound output is interrupted for a moment because the digital input signal is selected again.

RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER)

NOTE: If you will use the remote control unit, be sure to use it with the lid open.

1. Set the REC OUT selector to the SOURCE position.

Front panel

REC OUT/

ROOM 2 SELECTOR

DVD/LD SOURCE TAPE (MD)

TV/DBSTUNER

VCR 1

CD

VCR 2

PHONO

VIDEO AUX

 

2. Select the source you want to record.

Front panel

Remote control

VCR 1

DVD/LD

 

 

 

DVD/LD

 

 

or

APE (MD)

TV/DBS

 

3.Play the source and increase the setting of the master VOLUME control to confirm it. (For detailed information on tuning operations, refer to page 49.)

Front panel

 

Remote control

 

VOLUME

 

 

 

l6

 

MASTER VOLUME

20

l2

 

 

28

 

8

 

40

 

or

MUTE

 

4

 

602

0

–dB

4.Set the tape deck, MD recorder or VCR used for recording to the recording mode.

English

47