Yamaha S03 - page 43

Basics Section

1In the Multi mode, select the S03 Multi you want

to transmit.

2Press [JOB] to enter the Multi Job mode.

3From the “BlkDmp” parameter (PAGE 5) in the

Multi Job mode, select the data type for

transmitting. Here, select “Curnt” (Current) to

transmit the currently selected Multi data, then

press the [ENTER] button.

4In XGworks (lite), specify track 1 for recording.

5After starting recording on XGworks (lite), press

the S03’s [INC/YES] button to transmit the data.

6When data transmission is ﬁnished, stop

recording on XGworks (lite). Check the List

Window to conﬁrm that the data (shown in

hexadecimal) has been properly received and

recorded by XGworks (lite).

nFor information about recording or saving, refer to

the on-line manual included with the XGworks

(lite).

Now, whenever you play back the song ﬁle with this

recorded data, the appropriate S03 Multi settings are

sent as System Exclusive messages (page 99) from

XGworks (lite).

nFor best results, try to keep the playback tempo at

the same setting as was used for recording.

nWhen you assign the User Voice to the selected

Multi’s Part, record the User Voice as the same

manner. Select the AllUS (All User Voices) in the

BlkDmp screen (PAGE 3) in the Voice Job mode,

then transmit the bulk data using the same method

as Multi.

nIf necessary, S03 system (Utility and MIDI) data

can also be recorded. In the BlkDmp screen of the

Multi Job or Voice Job mode, select “Systm.”

nTo save the all S03 settings, transmit all three data

types below, and record/save them to the computer.

• All: All Multis (Multi Job mode)

• AllUs: All User Voices (Voice Job mode)

• Systm: System (Multi Job or Voice Job mode)

KEYELEMPART

OCTAVE

PAGE

BlkDmp

Sure?

Select the track for recording

Press the Record button to

activate recording standby

Press the Play button

to activate recording

Bulk transmit start

DATA

DEC INCNO YES