Performance Play mode
36 Owner’s Manual
Quick Guide Playing the S90 ES
Creating a Performance by combining the Voices
Performances can be made up of a maximum of four Parts, each of which can be assigned a different Voice. In this section,
we’ll create a Performance by combining two Voices.
Preparing to create the Performance
(Initializing the Performance)
The Initialize display is shown. Check the “ALL” check box
to initialize all data of the Performance. For details about
the Initialize function, refer to page 156.
Press the [INC/YES] button to initialize the Performance.
nPlease note that when you execute the Store operation by pressing
the [STORE] button here, the Performance at the destination will be
replaced with the Initialized Performance created in step 3 above.
nFor details about the Store operation, refer to page 56.
The current Performance name will change to “Init Perf” in
the display.
nWhen you initialize a Performance, the Voice at Preset Bank 1,
Voice number 1 is assigned to Part 1 as the default.
Playing the several Voices together
(Layer)
This calls up a list indicating which Voice is assigned to
each Part of the current Performance.
Since the current Performance has been initialized, the
only Voice in the Performance is “PRE1:
Natural S,” set to Part 1.
6-1 Move the cursor to the Voice Bank or Voice
Number of the Part 2.
6-2 Press the [SF1] ADD INT button. This enables
assignment of the selected internal Voice to Part
2.
nWhen assigning a Voice from Single-part Plug-in Board (page 99)
to a Part, press the [SF2] ADD PLG button.
1Select the desired Performance in the
Performance Play mode.
2Press the [JOB] button, and then the [F1]
button.
3Press the [ENTER] button. (The display
prompts you for confirmation.)
4Press the [PERFORM] button.
SF1
F1
SF2
F2F3F4F5F6
SF3SF4SF5
INFORMATION
EDIT JOB STORE
COMPARE
5Press the [F2] VOICE buttom.
6Assign the desired Voice to Part 2.
SF1
F1
SF2
F2F3F4F5F6
SF3SF4SF5
INFORMATION
Voice Bank Voice Number