Editing a Performance
56 Owner’s Manual
Quick Guide Editing a Program
Storing/Saving the created Performance
Two steps are necessary in order to store (save) your Performance—storing the edited Performance to internal memory and
saving the stored Performances to a USB storage device.
When you turn off the power to the instrument, User Performance saved in the Performance Store mode is not erased. As
such it is not necessary to save the data to USB storage device; however, you may want to save it for backup or
organizational purposes, using the Save operation.
Storing the edited Performance as a User Performance to internal memory
Select a Performance number by using the data dial, [INC/
YES] and [DEC/NO] button.
When you execute the Store operation, the settings for the destination
memory will be overwritten. Important data should always be backed
up to a separate USB storage device.
The display prompts you for confirmation. Press the [DEC/
NO] button to cancel the Store operation.
After the Performance has been stored, a “Completed”
message appears and operation returns to the
Performance Play display.
Never attempt to turn off the power while an “Executing...” or “Please
keep power on” message is shown. Turning the power off in this state
may cause the system to freeze and prevent normal startup the next
time the power is turned on, as well as resulting in the loss of all user
data.
If you select another Performance without storing, the currently edited
Performance will be lost. Make sure to store the edited Performance
before selecting another Performance.
Performance Edit
STORE SAVE
USB storage
device
Performance 001
Performance 002
Performance 003
Performance 128
Internal memory
Performance Edit
STORE SAVE
USB storage
device
Performance 001
Performance 002
Performance 003
Performance 128
Internal memory
Storing edited
Performances individually
All the User
Performance data in
internal memory can
be saved as a single
file.
[PERFORM] → [STORE]
1After editing the Performance, press the
[STORE] button to enter the Performance
Store mode.
2Select the destination Performance memory.
3Press the [ENTER] button.
CAUTION
DEC/NO INC/YES
EXIT ENTER
EXECUTE
4To execute the Store operation, press the
[INC/YES] button.
DEC/NO INC/YES
EXIT ENTER
EXECUTE
CAUTION
CAUTION