Creating a Song with the Multi mode
76 Owner’s Manual
Quick Guide Connecting the Computer and Midi devices
Storing/saving the created Multi
Two steps are necessary in order to store (save) your Multi—storing the edited Multi to internal memory and saving the
stored Multis to a USB storage device.
When you turn off the power to the instrument, User Multis saved in the Multi Store mode are not erased. As such it is not
necessary to save the data to USB storage device; however, you may want to save it for backup or organizational purposes,
using the Save operation.
Storing the edited Multi as a User
Multi to internal memory
The operation is the same as in the Performance mode
(page 56).
Saving the edited Multis to a USB
storage device
The basic operation is the same as in the Voice mode
(page 51). However, you must select the file type “All” as in
the Performance mode. When Type is set to “All,” execute
the Save operation to save all the created data, including
the Multis as well as the Voices assigned to them, as a
single file (extension: S7A).
Loading Multi data from the USB
storage device
These instructions describe how to recall the “All” file data
saved to the USB storage device, using the Load operation
to transfer the data to the instrument. An “All” file
(extension: S7A) contains all Multis.
If the device is divided into several partitions, select the
specific partition for use. If the device has several media
(e.g., discs) inserted, select a specific Slot number.
If the desired file was saved to a specific folder, enter the
folder and select the file. For information on how to select a
folder, see the “Supplementary information” on page 170.
nMultis cannot be loaded separately from the other data in an “All”
file.
When Type (file type) is set to “All” and the Load operation is executed,
all data that can be created on the instrument will be loaded. This
means that any existing data in User memory will automatically be
overwritten and lost. Make sure to save any important data to a USB
storage device before performing the Load operations, especially when
Type is set to “All.”
After the data has been loaded, a “Completed” message
appears and operation returns to the original display.
While the data is being saved/loaded, make sure to follow these
precautions:
* Do not remove or eject the media from the USB storage device.
* Do not unplug or disconnect the USB storage device.
* Do not turn off the power of the instrument or the relevant devices.
Multi Play/
Multi Edit
STORE SAVE
USB storage
device
Multi 001
Multi 002
Multi 003
Multi 128
Internal memory
All the Multi data in
internal memory can
be saved as a single
file.
Storing edited Multis individually
[MULTI/SEQ PLAY] (select Multi mode) → [STORE]
[FILE] → [F2] SAVE
[FILE] → [F3] LOAD
1Press the [FILE] button to enter the File mode.
Then press the [F1] CONFIG button and [SF2]
CURRENT button.
2Press the [F3] LOAD button to call up the Load
display.
3Select the file type “All.”
4Press the [SF1] EXEC button to actually load
the file.
USB storage Internal memory
(Flash ROM)
Multi 001
Multi 002
Multi 003
Multi 064
Multi 001
Multi 002
Multi 003
Multi 064
File extension: S7A
All the Multi
data in
internal
memory can
be saved as a
single file.
CAUTION
CAUTION