Yamaha S90 ES - page 86

Using the S90 ES with computer software

86 Owner’s Manual

Quick Guide Connecting the Computer and Midi devices

Parameters to be edited differ depending on the assigned Effect and Software Tone Generator.

Additional operations other than those listed above are available. For details, refer to the relevant

documentation of Mackie Control.

When turning the [VOLUME] button off, the Control sliders on the S90 ES are assigned to perform

the same functions as the Knobs on the DAW controller.

When controlling SONAR 4:

Functions of Mackie Control assigned to [F1] - [F6] and [SF1] -

[SF5] buttons

When turning the [VOLUME] button off, the Control sliders on the S90 ES are assigned to perform

the same functions as the Knobs on the DAW controller.

The Song Position Bar may not synchronize with the actual playback position during Scrub

playback.

Parameters to be edited may differ depending on the assigned Effect and Software Tone

Generator.

Some parameters may not be available depending on the selected Effect Type.

Press the [DRUM KIT] button to indicate the Track/Slot/EQ/DYN number in the brackets [ ] at the

top of the LCD.

The [M2] - [M4] buttons on the Mackie Control correspond respectively to the [EDIT], [JOB], and

[STORE] buttons at left below the LCD.

Additional operations other than those listed above are available. For details, refer to the relevant

documentation of Mackie Control.

You can ﬁnd the Help window by selecting “Mackie Control” from the Tool Menu on SONAR and

pressing the [F1] button.

Please keep in mind that some functions may not be available.

PLUG-IN mode [PLUG-IN] (SELECTED CHANNEL only)

Knob 1 Changes the Slot Number (on page 1 only).

Knob 2 Turns the Effects on or off (on page 1 only).

Knob 3 Selects an Effect Type (on page 1 only).

Knobs 1 - 8 (turning) Edits each of the parameters (on page 2 and later).

SEND EFFECT mode [SENDS]/MASTER EFFECT mode [MASTER] (Global mode only)

Knob 1 Changes the Slot Number (on page 1 only).

Knob 2 Turns the Effects on or off (on page 1 only).

Knobs 1 - 8 Edits each of the parameters (on page 2 and later).

INSTRUMENT mode [INSTRUMENTS] (Global mode only)

Knob 1 Changes the Slot Number (on page 1 only).

Knob 2 Turns the software tone generator on or off (on page 1 only).

Knobs 1 - 8 Edits each of the parameters (on page 2 and later).

Button/Controller names on

Mackie Control Functions

In all modes:

[EDIT] Assigns a parameter to a Knob by using the [CHANNEL] and

[BANK] buttons.

[CHANNEL </>] (Multi

channel)

Changes a parameter to be edited via a Knob in order one by

one when [EDIT] is turned on.

[BANK </>] (Multi channel) Changes the parameters to be edited via a Knob in groups of

eight when [EDIT] is turned on.

[CHANNEL </>]

(Selected channel)

Changes an indicated parameter in order one by one when

[EDIT] is turned on.

[BANK </>] (Selected

channel)

Changes the indicated parameters in groups of eight when

[EDIT] is turned on.

[NAME/VALUE] Changes the indication of the parameter name and its value.

[SEL] Selects a channel.

[MUTE] Mutes or unmutes each channel.

[M4]+[MUTE] Unmutes all channels.

[SOLO] Sets Solo for each channel to on or off.

[M4]+[SOLO] Sets Solo for all channels to off.

[REC RDY] Sets the REC RDY of each channel to on or off.

[M4]+[REC RDY] Sets the REC RDY of all channels to off.

[TRACK] Assigns a Track to a Fader.

[AUX] Assigns an AUX BUS to a Fader.

Button/Controller names on

Mackie Control Functions

ASSIGNMENT

TRACKS/DIALOG/WINDOW

FADER BANKS

PAN/SEND

TONE

ARP FX

TONE

ARP FX

SENDS

TRACKS PAN EQ BANK-L BANK-R M1

PLUG-INS DYN DIAL RESET KN1-4/5-8

FLIP

CHANNEL-L CHANNEL-R BANK-L BANK-R M1

EDIT NAME/VALUE DIAL RESET KN1-4/5-8

OK/ENTER

NEW AUDIO NEW MIDI FIT TRACK FIT PROJECT M1

CANCEL

NEXT WINDOW CLOSE WINDOW

KN1-4/5-8

TRACK

SAVE UNDO REDO BANK-L BANK-R M1

AUX MAIN DIAL RESET KN1-4/5-8

F1 F2 F3 F4 M1

F6 F7 F8 KN1-4/5-8

JOG PRM

MAKER LOOP SELECT PUNCH M1

LOOP ON/OFF HOME DIAL RESET KN1-4/5-8

CURSOR-L

CURSOR-DWN

CURSOR-UP ZOOM BANK-L BANK-R M1

CURSOR-R SCRUB DIAL RESET KN1-4/5-8

[MAIN] Assigns output level adjustment of the Virtual Main Bus to the

Faders.

[BANK </>] Scrolls through the track indication every eight channels.

[CHANNEL </>] Scrolls through the track indication channel-by-channel.

[FLIP] Assigns the functions of the Channel Knobs to the Faders.

[FLIP] → [FLIP] Switches the functions of the Channel Knobs and the Faders.

[NEXT WINDOW] Moves the next window to the front of the screen.

[LOOP SW] Sets Loop to on or off.

[F1] - [F8] [F1] - [F8] as deﬁned in SONAR.

[CLOSE WINDOW] Closes the current window.

[UNDO] Executes the Undo operation.

[REDO] Executes the Redo operation.

[SAVE] Executes the Save operation.

[M1]+[MARKER] Opens the window for entering the Marker to the current song

position.

[MARKER] Turns the Marker on or off.

[RWD] Press brieﬂy to move back one measure at a time, or hold to

continuously rewind.

When the Marker is turned on, this operation moves the song

position to the previous Marker.

[M1]+[RWD] Moves the song position to the top of the song. When the

Marker is turned on, this operation opens the window for

entering the Marker.

[FF] Press brieﬂy to move forward one measure at a time, or hold

to continuously fast-forward.

When the Marker is turned on, this operation moves the song

position to the next Marker.

[M1]+[FF] Moves the song position to the end of the song. When the

Marker is turned on, this operation opens the window for

entering the Marker.

[STOP] Stops recording or playback.

[PLAY] Press to start playback from the current point.

[REC] Press this to start song recording. The [F] (Play) and [I]

(Rec) lamp are turned on during recording.

[ZOOM] Turns Zoom on and off.

[SCRUB] Turns Scrub on and off. When Scrub is on, the dial can be

used for Scrub playback. When Scrub is off, the dial is used

to move the song position.

[JOG PRM] Turns Data Entry on and off. When turned on (the lamp lights),

rotating the dial has the Data Entry function.

TRACK mode [TRACKS] (Track Parameter mode)

[TRACKS] → [TRACKS] (Selected Channel mode)

Knobs 1 - 8 (turning) For editing parameters. (The LCD indication may not be

updated.)

Knobs 1 - 8 (pressing) Resets the parameter value to its default.

PAN mode [PAN]

[PAN] → [PAN] (Selected Channel mode of PAN/SURROUND)

Knobs 1 - 8 (turning) For editing parameters.

Knobs 1 - 8 (pressing) Resets the parameter value to its default.

SEND mode [SENDS]

[SENDS] → [SENDS] (Selected Channel mode)

Knobs 1 - 8 (turning) For editing parameters.

Knobs 1 - 8 (pressing) Resets the parameter value to its default.

PLUG-IN mode [PLUG-IN]

[PLUG-IN] → [PLUG-IN] (Selected Channel mode)

[M1]+[CHANNEL </>] Changes the Plug-in number when the [EDIT] is turned on.

Knobs 1 - 8 (turning) For editing parameters.

Knobs 1 - 8 (pressing) Resets the parameter value to its default.

EQ Edit [EQ]

[EQ] → [EQ] (Selected Channel mode)

(in the Selected Channel mode) [EQ] (Band mode)

[M1]+[CHANNEL </>] Changes the EQ number when the [EDIT] is turned on.

Knobs 1 - 8 (Band mode) For editing each frequency band.

Faders (Band mode) For editing the gain of each Band.

Button/Controller names on

Mackie Control Functions