INSTALLATION PROCEDURE
6 Secure the unit.
Align the holes in the large wall mount bracket with the holes in the bottom of the small wall mount brackets, and then use two of the supplied projector mounting screws (M6 x 16) to secure the unit. The positions of the screw holes vary depending on the type of the Digital Sound Projector. Refer to the following illustrations and check the correct positions of the screw holes used to secure your Digital Sound Projector.
■
Digital Sound Projector Bottom View
Projector mounting screws (M6) (supplied)
Use the inward screw hole on each side to secure your Digital Sound Projector.
■
Digital Sound Projector Bottom View
Projector mounting screws (M6) (supplied)
Use the outward screw hole on each side to secure your Digital Sound Projector.
En 8
