Using the PURE DIRECT switch

You can enjoy the purest possible sound from your audio sources by setting this switch so that the indicator illuminates. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE and LOUDNESS controls, eliminating any alterations to the audio signal.

*Concerning AX-570 only, the SUBSONIC FILTER switch and the PRE OUT/MAIN IN terminals are also bypassed.

PURE

DIRECT

Setting the PHONO switch

<For AX-570 only>

Select either MM or MC position depending on your PHONO cartridge, Moving Magnet or Moving Coil type. However, if you use a high output MC cartridge, select MM position.

PHONO

MC

MM

Setting the SUBSONIC FILTER switch

<For AX-570 only>

If you set this switch to “ON” position, undesirable ultra-low- frequency signals caused by turntable rumble or warped records can be cut out without losing sound quality.

SUBSONIC

FILTER

ON

OFF

When you listen with headphones

PHONES

Connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

9