CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
•Leave the main speakers connected to the amplifier.
•Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.
*For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select the method of connecting to the speaker terminals.
•To connect with a YAMAHA DSP amplifier, connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal.
If using one unit
Left speaker | This unit | Right speaker |
| INPUT2 | INPUT1 |
|
| FROM AMPLIFIER |
OUTPUT
TO SPEAKERS
| To AC outlet | <YAMAHA DSP amplifier> | Pin plug cords |
| LOW PASS |
| |
|
|
| |
Amplifier |
| <Amplifier> |
|
If using two units
Left speaker |
|
| Right speaker |
INPUT2 | INPUT1 | INPUT2 | INPUT1 |
| FROM AMPLIFIER |
| FROM AMPLIFIER |
|
| Pin plug |
TO SPEAKERS | TO SPEAKERS | cords |
OUTPUT | OUTPUT |
|
This unit | This unit |
PRE OUT
Amplifier
To AC outlet | To AC outlet |
•When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of this unit. If connected, they will not produce sound.
•When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.
8