Yamaha SW10 IMPORTANT

• Turn off all musical instruments, audio equipment,

and speakers when connecting to this unit. Use the

correct connecting cables and connect as speciﬁed.

• Always lower the volume control to minimum

before turning on the power to this unit. A sudden

blast of sound may damage your hearing.

• Do not raise the volume of headphones or speakers

to a level that makes you feel uncomfortable.

Listening to loud music for long periods can

damage your hearing.

• This speaker is magnetic shielded. However, if a

nearby monitor displays any uneven colors, place it

further away from the monitor.

• You may feel a ﬂow of air in and out of the port on

this unit. This is not abnormal and sometimes

occurs when a program with a lot of bass range is

played.

• XLR-type connectors are wired as follows: pin 1:

ground, pin 2: hot (+), and pin 3: cold (–).

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

GREEN-AND-YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the terminals in

your plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be

connected to the terminal in the plug which is marked by the letter E

or by the safety earth symbol or coloured GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal

which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

* This applies only to products distributed by YAMAHA KEMBLE

MUSIC (U.K.) LTD.