9
ABOUT THE DRIVER
In order for Windows to work with MIDI, a driver(and MIDI mapper for Windows 3.1) is
required. The Yamaha SW60XG software installation procedure automatically places the
Yamaha SW60XG Driver in the Control Panel and the SW60XG MIDI map into the MIDI
Mapper.
If the other application software has already used the MIDI Port Address 300, you are
required to select the address other than 300 in the SW60XG Driver Setup. (You are also
required to change the MIDI Port Address jumper setting to the same number as the
address you have selected here. See page 3 for the MIDI Port Address jumper setting.)

Setting up the MIDI Port Address (SW60XG Driver) for Windows 3.1

1. Double click the [Control Panel] icon in the Main group.
The Driver Setup Dialog Box appears.
2. Click to select the [Yamaha SW60XG Driver].
3. Click the [Setup] to open the Yamaha SW60XG Driver Setup.
4. Change the MIDI Port Address as required.
In a similar way, you can change the MIDI Port Address in the Advanced setup in the
Multimedia Properties (Control Panel) for Windows 95.
¢Be sure to change the MIDI Port Address jumper setting to the same number as the address you
have selected here. See page 3 for the MIDI Port Address jumper setting.
CONTROL.INI
[drivers.desc]
sw60xg.drv=Yamaha SW60XG.Drv
[Userinstable.drivers]
midixx=sw60XG.drv
Additions to the AUTOEXEC.BAT, SYSTEM.INI and CONTROL.INI files
The SW60XG software program will automatically add the following lines to these files.
AUTOEXEC.BAT * _ indicates a space.
rem--SW60XG installer wrote. Do not modify the following_line--
C:\SW60XG\efcon_/type:1_/line:100_/mic:100_/midi:100_/vcl:0
rem --
*If you add the above lines to the AUTOEXEC.BAT when you make the start-up disk for DOS games, you can
automatically add effects to the game sounds.
SYSTEM.INI
[drivers]
midixx=sw60xg.drv
[SW60XG.DRV]
port=300
* xx=An appropriate value.
99.12.14, 3:45 PMPage 9