Basic components
3 | 4 | 1 | 2 |
ZMU01992
1.Air vent screw
2.Fuel gauge
3.Fuel joint
4.Fuel tank cap
EMU25830
Fuel joint
This joint is used to connect the fuel line.
EMU25841
Fuel gauge
This gauge is located on either the fuel tank cap or on the fuel joint base. It shows the approximate amount of fuel remaining in the tank.
EMU25850
Fuel tank cap
This cap seals the fuel tank. When removed, the tank can be filled with fuel. To remove the cap, turn it counterclockwise.
EMU25860
Air vent screw
This screw is on the fuel tank cap. To loosen the screw, turn it counterclockwise.
EMU26180
Remote control
The remote control lever actuates both the shifter and the throttle. The electrical switches are mounted on the remote control box.
1.Power trim and tilt switch
2.Remote control lever
3.Neutral interlock trigger
4.Neutral throttle lever
5.Main switch / choke switch
6.Engine stop lanyard switch
7.Throttle friction adjuster
EMU26190
Remote control lever
Moving the lever forward from the neutral position engages forward gear. Pulling the lever back from neutral engages reverse. The engine will continue to run at idle until the lever is moved about 35° (a detent can be felt). Moving the lever farther opens the throttle, and the engine will begin to accelerate.
1.Neutral “
”
2.Forward “
”
3.Reverse “
”
4.Shift
5.Fully closed
6.Throttle
7.Fully open
15