Operation
4.To return the outboard motor to the nor- mal running position, place the gear shift lever in neutral, then place the tilt lock le- ver in the lock/down position.
5.Slightly tilt the outboard motor up until the tilt support bar automatically returns to the free position.
6.Slowly lower the outboard motor to the
normal position.
EMU28090
Power trim and tilt models / power tilt models
The outboard motor can be tilted up partially to allow operation in shallow water.
EWM00660
WARNING
●Place the gear shift in neutral before set- ting up for shallow water cruising.
●Return the outboard motor to its normal position as soon as the boat is back in deeper water.
ECM00260
CAUTION:
Do not tilt the outboard motor up so that the cooling water inlet on the lower unit is above the surface of the water when setting up for and cruising in shallow water. Otherwise severe damage from overheating can result.
EMU28183
Procedure for power trim and tilt / power tilt models
1.Place the gear shift lever in neutral.
2.Slightly tilt the outboard motor up to the desired position using the power trim / tilt switch.
UP UP
DN
ZMU01935
43