Maintenance
ZMU02067
4.Clean the filter (located on the end of the suction pipe) in a suitable cleaning sol- vent. Allow the filter to dry.
5.Replace the gasket with a new one. Re- install the fuel joint assembly and tighten
the screws firmly.
EMU29312
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from corrosion by sacrificial anodes. Inspect the external anodes periodically. Remove scales from the surfaces of the anodes. Consult a Yamaha dealer for replacement of external anodes.
ECM00720
CAUTION:
Do not paint anodes, as this would render them ineffective.
NOTE:
Inspect ground leads attached to external anodes on equipped models. Consult a Yamaha dealer for inspection and replacement of internal anodes attached to the power unit.
EMU29320
Checking battery (for electric start models)
EWM00330
WARNING
Battery electrolytic fluid is dangerous; it contains sulfuric acid and therefore is poisonous and highly caustic.
Always follow these preventive measures:
63