Listening to a USB device
Note
You can remove your USB device whenever you want.
■Playing back normally
1Set your USB device into the USB
port.
This unit supports USB mass storage class devices (e.g., flash memories or portable audio players) using FAT16 or FAT32 format.
Notes
•Some devices may not work properly even if they meet the requirements.
•Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an external HDD, etc.
•Yamaha will not be held responsible for any damage to or data loss on the USB device occurring while the device is connected to this unit.
•Playability of and power supply to all kind of USB devices are not guaranteed.
2Select USB.
Playback starts.
LISTENING TO MUSIC
■Switching the playback information display
Switch the display in USB playback mode.
Press repeatedly.
You can change the information display as follows.
Elapsed time of the current track (default setting)
↓
Track name*
↓
Artist name*
↓
Album name*
↓
File name
↓
Back to the default setting
* Only when the selected file has information
y
On MP3/WMA files, refer to “NOTES ON DISCS AND USB DEVICES” (☞ P. 19).
OPERATION
Note
The reading time may exceed 30 seconds, depending on the number of files/folders.
■Playing back in random sequence/
repeatedly
After the above steps 1 and 2, you can enjoy random and repeat mode.
Set in the same way as for CDs (☞ P. 12).
English