Yamaha TX480 To turn the unit into the PS mode or PTY mode

To turn the unit into the PS mode or PTY mode

Press the FREQ/PS/PTY button. Whenever pressed, the mode changes into the PS mode, PTY mode and returns to usual mode in turn.

*When an RDS station is received, the display is automatically turned into the PS mode. Do not press the FREQ/PS/PTY button until the display is turned into the PS mode. If the button is pressed before the display mode is changed, it may occur that “NO PS” flashes on the display. This is because the unit has not received all of the RDS data on the station yet.

		PS mode	The name of the station being received is displayed.
			If the station is not an RDS station, “NO PS” flashes on the
			display and then returns to usual mode.
PS/PTY SEEK
		PTY mode	A program type for the station being received is displayed.
	SHIFT ENTER		If the RDS station does not employ the PTY data service,
			“NO PTY” flashes on the display and then returns to the PS
			mode.
			If the station is not an RDS station, “NO PTY” flashes on the
			display and then returns to usual mode.
		Usual mode	The frequency of the station being received is displayed.

Note

When PS or PTY data reception is not possible due to poor reception conditions, “NO PS” or “NO PTY” flashes on the display in each mode. In such a case, press the TUNING MODE button so that “AUTO TUNING” goes off from the display. Though the reception mode is changed to monaural by this operation, when you changes to the PS or PTY mode, PS or PTY data may be displayed.

14