Yamaha TYROS - page 116

Style Creator (Digital Recording)

Reference

116 TYROS Owner’s Manual

114

Basic Settings and Realtime Recording for each part (channel)

The explanations here apply when you call up the BASIC page in step #4 of the Basic Procedure above. Refer to the illustrations

above for information about the basic style creation parameters. For actual instruction steps for recording, see the sections below.

■ Recording note events to a Rhythm part (channel)..................................................

1Select one of the Rhythm parts as a recording part on the BASIC display (above).

Basic Procedure (Style Creator)

DIGITAL

RECORDING

SONG

STYLE

MULTI PAD

EXIT

• Any voice can be selected for the RHY1 channel, with

the exception of Organ Flutes.

• Only Drum Kit/SFX Kit can be selected for the RHY 2

channel.

• For the non-rhythm channels (BASS - PHR 2), all voices

with the exception of the Organ Flutes voice/Drum Kit/

SFX Kit can be selected.

• You can also select the desired section for recording by

pressing the appropriate panel button. Pressing one of

the Section buttons (including the [AUTO FILL IN] button)

calls up the SECTION pop-up window, from which you

can change Sections.

• To actually enter the change, press the [OK] LCD button.

First, select the desired style and one of its

sections.

Press the [DIGITAL RECORDING] button.

Select a section and part (channel) to be created or

recorded, and set the basic parameters for style creation.

Press the [STYLE CREATOR] LCD button.

After you’ve ﬁnished creating/editing a

style, make sure to execute the Save

operation. The recorded style will be lost

if you change to another style or you

turn the power off without executing the

save operation (page 69).

Execute Realtime recording.

Execute Assembly (page 118).

Edit the already-recorded parts (channels).

Execute Step Recording

using the Event List.

Set the desired part (channel) to “REC” by pressing the corresponding lower LCD

button while holding the [REC CH] button. Only one part (channel) can be recorded

at a time.

Press the LCD up button to call up the Open/Save display for voices to change the

voice of the selected part. Press the [EXIT] button to return to this display.

You can also turn each part’s playback on/off durring recording by pressing the

lower LCD button.

Press this if you want to create a style from scratch

by deleting all data of the selected style.

When this button is

pressed, DELETE

will appear for parts

which contain data.

Set the desired part

to “DELETE” by

pressing the corre-

sponding upper

LCD button while

holding this button

to delete all data in

the corresponding

parts. The data is

actually deleted

when this button is

released.

This operation corresponding to step #4

is covered in the following page.

Select the desired number of measures for the selected section

(except for FILL IN sections, which are ﬁxed at 1 measure).

Press the [EXECUTE] LCD button to actually enter the new set-

tings, and check it by pressing the [START/STOP] button in the

STYLE CONTROL section to hear style playback.

Select a section to

be created.

• You cannot overdub-record (page 115) new material to any parts (channels)

that contain preset data, with the exception of the Rhythm parts (channels).

Make sure to delete preset data of non-Rhythm parts before recording, by

using the [DELETE] LCD button above.