Mixing Console
Reference
137
TYROS Owner’s Manual
135
■
System Effects and Insertion Effects
All the effect blocks are connected or routed in one of two ways: System or Insertion. System applies
the selected effect to all parts, while Insertion applies the selected effect to one specific part.
The DSP 1 effect can be configured for either System or Insertion routing via the Effect Parameter
settings (page 138).
■
Effect Signal Flow Chart
RIGHT 1
RIGHT 2
RIGHT 3
LEFT
Song part
(each channel)
Style part
(each channel)
Multi Pad
Microphone
sound
Insertion Effect
Assigned automatically to
respective parts as needed.
DSP2
DSP3
DSP4
DSP5
DSP1
DSP6 Vocal
Harmony
Part EQ
Master
Compressor Master EQ
Send Level
(set for each part or
channel)
Return Level
(set for all parts or
channels)
DSP1ChorusReverb
System Effect
When DSP1 is set as
an Insertion effect
Output
When DSP1 is set as an System effect
• About DSP 1
In most cases, the DSP 1 effect block is available for either the song or style part. For songs and
styles, the effect block is applied to only the last selected or played part.
For example, when selecting or starting a song during style playback, the DSP 1 effect applied to the
style part is cancelled and is applied instead to the song part. Particularly if the style data originally
is processed with a distortion effect of DSP 1, this operation may result in disrupting the overall vol-
ume balance among the style parts (channels).
Note that the same problem may occur when starting or selecting a style during song playback.
• About DSP 2 - 5
The effect blocks DSP 2 through 5 are available independently for the keyboard parts and song
parts. Only that part which has been assigned to an effect block can use that effect. For example, if
you select or start a song, the DSP effect applied to the keyboard part is cancelled and is applied
instead to the song. Pressing the [DSP] button on the panel restores the corresponding effect block
to the current keyboard part (from the song).